Nixer - RD Dante
- Varor i lager skickas samma eller nästa dag
- Ring om du har frågor | 08-564 817 70
- Maila går också bra | sales@visono.se
- VarumärkeNIXER
Beskrivning
Art.nr: 560-1510
Signalerna går att lyssna på via de 75mm stora inbyggda högtalarna eller via en 6,3mm hörlursutgång. Högtalaren stängs automatiskt av om man sätter i en hörlur. Dessutom finns två kanaler balanserad line- eller AES-utgångar via XLR-kontakter på baksidan.
Både högtalaren och hörlursutången har individuella inställningar för volymen och Line- och AES-utgångarna kan konfigureras med individuell volym, eller följa nivån på högtalare eller hörlursutången.
Ingångar finns som obalanserad stereo line in via ett 6,3mm telejack, som AES på XLR Alla ingångar kan routas till valfri Dante-utgång.
Enheten kontrolleras via en stor 5-tums LCD kapacitiv touchskärm och menyerna är både enkla och intuitiva.
Firmware uppdateras via en dedikerad USB-B-kontakt på framsidan.
RD Dante har 2st IEC ingångar för strömmatning (90v to 250v vid 50-60Hz) som kan användas separat eller tillsammans för redundans.
1 Monitoring of 64 Dante channels at 48kHz (32 channels at 96kHz)
2 Output up to 64 Dante channels at 48kHz (32 channels at 96kHz)
3 Sample rates supported
- 44.1kHz
- 48kHz
- 88.2kHz
- 96kHz
4 Bit Depth supported
- 16bit
- 24bit
- 32bit
5 Dante implementation supports
- Dante Controller
- Dante Domain Manager
- AES67
- SMPTE 2110
- Remote setup of other Dante devices connected to the same network with controls for
- Network settings
- Routing
- Sample rate
- Device name
- Identify
6 Two main modes of operation
- User defined mix to L and R output
- User memories with customizable names
- PFL mode where selected channel is sent to LR with two modes
- Auto cancel previous selection
- Additive with Clear button
7 64 channel meters
- High resolution meters
- Optional Peak indicator with user definable trigger level
8 Main LR meters
- Large high-resolution meters displaying 0dBFS down to -60dBFS in 1dB steps
- Optional Peak hold
- Optional Working level indicator with user definable level
9 Internal 25W/channel amplifier feeding either
- 2x 63.5mm full range drivers in optimized ported cabinets
- Headphone output
10 Dual Balanced Line Outputs 0dBFS = +21dBu maximum output into 600ohms 2x 3pin male XLR connectors
- Fed from main Stereo LR bus
- Option to follow main volume control
- User adjustable trim (0dB to -60dB in 1dB steps)
- Output Mute relays
11 Stereo AES output on 3pin male XLR connector
- Fed from main Stereo LR bus
- Option to follow main volume control
- User adjustable trim (0dB to -60dB in 1dB steps)
12 Stereo AES Input on 3pin female XLR connector
- User selectable routing to Dante output(s)
13 Stereo unbalanced line input on 3.5mm stereo jack
- with input level trim control suitable for use with common music playback devices such as, iPods, iPhones, MP3 players
- max input level +8.5dBu
14 3.5mm Headphone socket and microphone input
- Headphone output for driving loads from 8ohm to 600ohm
- Microphone input with gain control (up to 40dB) and level trim
- Socket wiring is suitable for use with most common mobile phone headsets
15 Dual 1Gbps RJ45 Dante inputs
- 1Gbps or 100Mbps operation
- User configurable for Switched or Redundant operation
- Network configuration information available via menu
16 Power input
- NIX00537
- 2x IEC mains socket
- 90-250V 50-60Hz mains input
- Both power inputs can be active at the same time for redundancy
- NIX00537DC
- Alternate version NIX00537DC has 2x 2.1mm DC inputs sockets in place of the 2x IEC mains inputs and must be powered via an external 24V 2Amp DC adaptor(s)
- Adaptors not supplied
- Both power inputs can be active at the same time for redundancy
17 USB port is used for product firmware updates
18 Internal oscillator with selectable routing to Dante output(s) and level control
- Sine/Square/Triangle Wave generation settable to a frequency of 50Hz, 100Hz, 200Hz, 500Hz, 1kHz, 2kHz, 5kHz and 10kHz
- White Noise Generator
- Pink Noise Generator
19 LCD
- 5.0” (127mm) diagonal 24bit colour LCD with 800xRGBx480 resolution
- LED backlight (adjustable brightness via software)
- 5-point touch capacitive touch overlay with gesture support
20 Size
- 494mm wide by 300mm deep by 88mm height
- 7.5kG
21 19inch rack mounting ears can be removed for desktop use